Dashboard

 

  ×Left dashboard are the same in all skid steer loaders

  ×Right dashboard

Standard (start key)
Luxury start key (no)

 

———————————————————-

 

     

THERMOMETERS

×engine display

×Coolant temperature

 

 

 

 

———————————————————-

FUEL GAUGE

*Accurate display the oil tank

Has delay so gauge reading is stable

 

 

 

 

 

———————————————————-

Chronograph

Record machines have work of total hours

Technical Information DisplayDisplay digital format fault codeIf there are multiple fault code appears, the fault code will be on the screen with 2 second hand cycle rolling appear

If there is no fault code, the screen will show NONE.

Preheating countdown number of seconds

In cold weather, preheating resistance will automatically activated, the cylinder to warm up.On the screen shows the rest of the need to warm up time (second hand number).

———————————————————-

LIGHT SWITCH

 

Press a is open the front light.

The second press is open before and after light.

The third press is close all light.

This switch is also gauge lamp

 

———————————————————-

FAULT CODE READ SWITCH

Press down and keep at least 2 second hand

If a fault code, and its format

As follows: xx, xx

If no failure code, have none character

Press down and keep 2 second hand is to return to display hours.

———————————————————-

 

BUCKET HORIZONTAL POSITION SWITCH(RPO)

The pressure is on bucket level positioning function

Again under pressure is off

Press the switch and keep 2 second hand

Stopwatch will display

*Control computer software version number

*Automatic flameout state(Normal cut-off,After automatic switch off)

———————————————————-

ATTACHMENT AUXILIARY HYDRAULIC DEVICE

high flow(Only applies to assembly have high flow pump machine)

The pressure is on high flow auxiliary hydraulic circuit

The second under pressure is off high flow auxiliary hydraulic circuit

 

 

———————————————————-

MAXIMUM/VARIABLE FLOW SWITCH

 

Press the switch a: on variable flow. (PWM mode)

Press the first secondary: on the maximum flow

The third time under the pressure is off auxiliary hydraulic loop oil supply

 

 

———————————————————-

 

AUXILIARY PRESSURE RELEASE SWITCH

Press and hold

Engine will flameout

Auxiliary hydraulic circuit of pressure will automatically pressure relief.

Replace the old car boot key left rotation pressure relief characteristics

Pressure relief is completed, will start the key switch to OFF position.

———————————————————-

PRESS THE SWITCH OPERATION MACHINE

 

Press the switch activation BICS system (driver in the bridge seat seat is good, and seat safety bar must be under pressure)

If the lights flashing, show that the machine is capable of, we can, from the hour meter reading fault code

 

 

———————————————————-

 

SEAT SAFETY BAR INDICATOR

In the seat safety bar under the pressure, the indicator (green light).

 

 

 

 

 

———————————————————-

LIFTING AND TILTING CONTROL VALVE

 

When this indication when the light is bright, the big arm lifting and bucket tilting valve core lock been lifted.

 

 

———————————————————-

 

WALK LOCK

In the seat safety bar pressure, engine running and parking brake switch remove and operating switch under the pressure, the indicator emit light

 

 

 

———————————————————-

 

WALK LOCK BEYOND THE SWITCH

 

Press down remove brake.

Press down again produce the brake.

Only in the seat safety bar when up play a role.

 

 

———————————————————-

BUZZLE

 

Keys to open: 1, normal

Fault or produce abnormal: 3 sound

Automatic cut-off: continuous voice

 

 

 

 

—————————————————————————

 

 

14 WARNING LAMP

Be lit during machine has fault or a situation.

 

 

 

———————————————————-

Advanced manual control light

Light and buzzer alarm

*Can detect the fault code

*At present machine dimension has this function

 

 

 

 

 

———————————————————-

ACCESSORY CONTROL DEVICE

Light shining and buzzer sound

-Can detect the fault code

recording light

-ACD electrical connector has been connected

In the present machine, ACD have connection, the light does not shine

 

———————————————————-

CONVENTIONAL ALARM SIGNAL

Light and buzzer sound

-Can detect the fault code

Light shining and buzzer sound alarm

-5 after the second hand machine automatic flameout

 

 

 

 

———————————————————-

FUEL LEVEL TANK

Tank medium oil bit is too low

-Can detect the fault code

 

 

 

 

 

 

———————————————————-

SYSTEM VOLTAGE EXCEPTION ALARM LAMP

Voltage is too high or too low alarm

-Can detect the fault code

 

 

 

 

———————————————————-

ENGINE OIL PRESSURE ALARM LAMP

Light and buzzer alarm, said

-Oil pressure too low or system failure

-Can read fault code.

Light shining and buzzer a nonstop alarm sound, said

-Oil pressure is relatively low

-The machines will be in 15 second hand inside automatic flameout

———————————————————-

Engine temperature alarm lamp

The alarm light and buzzer alarm, said

-Engine temperature higher or system anomaly.

-Can read the fault code

Light shining and buzzer a nonstop alarm sound, said

-Engine temperature is quite high

-The machines will be in 15 second hand inside automatic flameout

———————————————————-

AIR FILTER PLUGGING ALARM LAMP

Light and buzzer alarm sound, said

-Air filter plugging.

Light shining and buzzer a nonstop alarm sound, said

-System anomaly.

-Can read the fault code

 

 

 

———————————————————-

INDICATOR LIGHT ON HIGH SPEED WALKING

Indicator light on high speed walking

 

 

 

 

 

 

———————————————————-

 

ENGINE WARM-UP INDICATOR

Light (yellow light)

-Activation preheating function

flashing indicator light

-SystemException

-Can read the fault code

 

 

 

———————————————————-

PILOT OIL PRESSURE ALARM LAMP

Indicator light on high speed walking

-Pilot oil pressure too low or system anomaly

-Can read the fault code

Light shining and buzzer a nonstop alarm sound, said

-Pilot pressure is relatively low.

-Can read the fault code

-The machines will be in 15 second hand inside automatic flameout

———————————————————-

HYDRAULIC OIL TEMPERATURE ALARM LAMP

Light and buzzer alarm, said

-Hydraulic oil temperature is too high

-Can read the fault code

Light shining and buzzer a nonstop alarm sound, said

-Hydraulic oil temperature is quite high

-The machines will be in 15 second hand inside automatic flameout

———————————————————-

HYDRAULIC OIL FILTER PLUGGING ALARM LAMP

Light and buzzer alarm sound, said

-Hydraulic oil filter seere blockages

Light shining and buzzer a nonstop alarm sound, said

-System anomaly

-Can read fault code

 

 

 

———————————————————-

WINDING KEY

Used to start and shut down engine

 

 

 

 

———————————————————-

ACS mode selection switch:

For advanced manual control model, this switch used to choose a big arm and the bucket mode of operation: press the switch at the top is the manual control mode of operation; Under lower pressure switch is the foot pedal control mode of operation

Automatic quick change device switch:

For equipped with automatic quick change device models: press switch upper and maintain korah out quick change device lock pin, and the press.

stopping brake:

Press down on the top of switch is closed parking brake, under lower pressure switch, remove parking brake.

Direction indicator switch:

Switch is closed, the display to the left or to the right turn

Danger signal lamp:

Press switch upper, dangerous light open; Press the switch is closed lower

Rotating ceiling lamp switch:

Press down on the upper switch is open rotating dome light, Under lower pressure switch is closed